96
1
8.2.2 Making the pump visible to other devices
For communication with some devices, it is necessary to make
the pump visible. That means the pump will send a signal that
the other device can detect to notice the pump.
For further explanations and instructions also consult the
documents accompanying the device the pump is supposed to
communicate with.
Ensure that Bluetooth is switched on before switching Visibility
on.
From the Settings menu, press z to move to
Communication.
Press o to select.
2
The Communication menu appears.
Press z to move to Visibility.
Press o to select.
3
The Visibility screen appears.
Press o to confirm.
4
The other device displays the serial
number of the pump.
Continue according to the instructions of
the other device.
To Next Page
Loading...
