98
3
2
1
8.2.4 Pairing the pump with other devices
To pair your pump with another device, you must also know how
to enable the communication on the other device. It is
recommended that you have the user instructions of the other
device available when starting the pairing procedure.
Before you start the pairing procedure, make sure Bluetooth
wireless communication is enabled on both devices.
Put the devices as close to each other as possible.
It is recommended to do the pairing in a private environment
where no other devices are sending Bluetooth or radio signals.
Also, make sure that the batteries are charged.
Start the pairing function on the device you want to pair with the
pump following its instructions for use or the instructions of the
used PC-software.
In the Settings menu press z to move to
Communication.
Press o to select.
The Communication menu appears.
Press z to move to Add device.
Press o to select.
The pump shows the Confirm serial
number screen.
Confirm the pump’s serial number on the
other device as soon as it appears on its
screen.
To Next Page
Loading...
