8
109
8.3.3 Adjusting the Key lock
With the Key lock function, the o, x and z keys of your pump
will be disengaged automatically when you do not press any of
those keys for a specified amount of time. This helps you to avoid
accidental operation of your pump when a o, x and z key is
pressed unintentionally (for example when the pump is under
your clothing and an object in your pocket touches a key). In this
section you will learn to set the time until the keys are locked.
The count down of this timeout starts as soon as the pump has
returned to the status screen.
Note
If you do not press o, x or z key for
more than 30 seconds, these keys will be
locked.
Press x and then z, or z and then x, to
unlock the keys to continue the
programming.
To Next Page
Loading...
