193
Status screen The Status screen indicates if your pump
is in RUN, PAUSE or STOP mode. You
can program Boluses, Temporary Basal
Rates and other functions from the
Status screen. Your insulin pump
displays the Status screen when no
programming is being performed and no
messages (error, maintenance, warning
or reminder) are present. The time,
current hourly basal rate, selected Basal
profile, and some currently activated
functions appear on the screen.
Additionally, a progress bar indicates
when a Bolus or TBR is currently
running.
STOP When your insulin pump is in STOP
mode, it does not deliver any insulin. The
insulin delivery is only stopped if an Error
or some Maintenance messages occurs,
if it is in PAUSE mode for more than
15 minutes or if you switch it to STOP
mode. Functions such as Bolus or
Temporary Basal Rate are interrupted by
putting your insulin pump into STOP
mode.
Temporary
Basal Rate
Temporary increase or decrease of your
Basal profile in percentages (from
0–250 %) to match changing insulin
needs due to increased or decreased
activity level, illness or stress.
To Next Page
Loading...
