28
Insert the new cartridge – plunger first –
into the cartridge compartment.
10 11
Replace the adapter on the bayonet
socket of the cartridge compartment
(about 120° angle).
13
Turn the adapter clockwise all the way to
the stop.
14
The adapter is correctly positioned when
it is aligned with the pump’s housing.
Press o to confirm.
15
The Cartridge type screen appears.
Press x or z to move to the appropriate
cartridge type.
Press o to select.
12
Make sure you correctly insert the nose of
the adapter into the notches of the
pump’s housing.
To Next Page
Loading...
