Blood Glucose Tests
15
Here is how to mark a test result and initiate a post‑meal test reminder:
1. Perform a blood glucose test. The blood glucose result appears on the display.
2. Leave the test strip in the meter. Press and release
to toggle through the test result markers and
post‑meal test reminder.
3. When the marker or test reminder that you wish to select appears on the display, remove the test strip
from the meter.
Unusual Blood Glucose Results
If your blood glucose result does not match how you feel, check this list to help solve the problem.
Troubleshooting Checks Action
1. Were the test strips expired? Discard the test strips if they are past the useby date.
Repeat the blood glucose test with an unexpired test
strip.
2. Was the cap on the test strip container
closed tightly?
Replace the test strips if you think the test strip
container was uncapped for some time. Repeat the
blood glucose test.
3. Was the test strip used immediately
after it was removed from the test strip
container?
Repeat the blood glucose test with a new test strip.
4. Were the test strips stored in a cool, dry
place?
Repeat the blood glucose test with a properly stored
test strip.
5. Did you follow the directions? See Chapter2, Blood Glucose Tests, and repeat the
blood glucose test. Contact Roche if you still have
problems.
6. Are the meter and test strips working
properly?
Perform a control test. See Chapter4, Performing a
Control Test, for instructions.
7. Are you still unsure of the problem? Contact Roche.
79718_07255233050_01_EN.indb 15 5/22/2019 1:44:52 PM
To Next Page
Loading...
Need help?
General
