Roche Accu-Chek Performa Nano User Manual

Meter Memory, Setup, and Data Transfer
17
3
Storing Blood Glucose and Control Results
The meter automatically stores up to 500blood glucose results and up to 20 control results with the time
and date of the result and any test result marker which you can review at any time. Test results are
stored from the newest to the oldest, so set the time and date correctly in the meter. Having the correct
time and date setting helps ensure appropriate interpretation of stored blood glucose results by you and
your healthcare team.
NOTE
• The memory is not lost when the batteries are replaced; however, confirm that the time and date are
still correct. See Chapter3, Setting the Time and Date.
• Once 500blood glucose results are in memory, adding a new test result causes the oldest one to be
deleted.
• If more than 500blood glucose tests are performed within a 90‑day period, only the most recent
500test results are included in the 90‑day average.
• Control results are stored in memory, but cannot be reviewed on the meter. To view stored control
results, first transfer them to a compatible software application. Contact Roche for product availability.
• Control results are not included in the 7‑, 14‑, 30‑, and 90‑day averages.
• Only test results that have been assigned a pre‑meal or post‑meal marker are included in pre‑meal
and post‑meal averages. All blood glucose results are included in the general 7‑, 14‑, 30‑, and 90‑day
averages.
Chapter 3: Meter Memory, Setup, and Data Transfer
79718_07255233050_01_EN.indb 17 5/22/2019 1:44:52 PM

Roche Accu-Chek Performa Nano Specifications

General

Brand	Roche
Model	Accu-Chek Performa Nano
Category	Blood Glucose Meter
Language	English