Roche Cobas C111 User Manual

cobas c 111
Host Interface Manual
Version
2
.1
28 / 93
Messages transmitted: Analyzer  Host
Messages transmitted by the analyzer (messages received by the host) are indicated in the
table below. The identifier is set in the Comment or ‘Special Instruction’ field in the Message
Header Record with the reason for the messages.
Messages Syntax / Records Comment or Special
Instructions
Reasons
Test Order Inquiry H
Q|n|^SID
L
TSREQ^REAL Inquiry is made for the ordered tests just after
the identified sample has been introduced into
the system. SID=SampleID, Test ID is always
ALL
Patient / Control
Sample Order List
H
P|n
O|1|^SID..
[C|1|..]
L
RSUPL^REAL
RSUPL^REPLY
RSUPL^BATCH
Reports on the result at the point when the re-
sults for the sample have been accumulated.
Reports on the result as a response for the in-
quiry from a host.
Transmits results of the selected sample(s) by
instruction at the analyzer.
Patient / Control
Sample Analytical
Data
H
P|n
O|1|^SID..
[C|1|..]
{R
[C|1|..]}
n
L
n = 0~60
RSUPL^REAL
RSUPL^REPLY
RSUPL^BATCH
Reports on the result at the point when the
results for the sample have been accumulated.
Reports on the result as a response for the
inquiry from a host.
Transmits results of the selected sample(s) by
instruction at the analyzer.
Photometric Raw
Data
H
P|n
O|1|^SID..
[C|1|..]
{R
[C|1|..]
[M-RR]}
n
L
RSUPL^BATCH
RSUPL^REAL
Reports results including the absorbance of the
photometric tests
Photometric
Calibration Data
H
M-CR
L
PCUPL^REAL The current calibration is reported immediately
after becoming valid.
ISE Calibration Data H
M-ICR
L
ICUPL^REAL The current calibration is reported immediately
after becoming valid.
Reagent Disk
Loading
H
M.EQU
INU^U05 Reports the current loading of a reagent disk
including reagent lot numbers in response to

Roche Cobas C111 Specifications

General

Brand	Roche
Model	Cobas C111
Category	Measuring Instruments
Language	English