USING THE MACHINE IN MANUAL MODE
To use the machine manually and create you own profile:
Screen 1 – Graph symbol Screen 1 – Manual mode symbol
1.
Press symbol and cycle through graph profiles – to the
symbol.
2.
The machine is now in manual mode.
3.
Load the portafilter with coffee and insert into the group head.
4.
Turn the group paddle to start the extraction (the further the
paddle is turned the greater the pressure created as indicated
by the profile on the screen. The display will allow you to monitor
pressure, time and water volume.
5.
At this point it is possible to save the manual profile you have just
created.
6.
To save the manual profile press symbol. The display will show
Last profile saved.
7.
To recall the saved profile scroll through the graph profiles –
to the symbol.
8.
Press the symbol graph and the machine will recall the last
saved profile.