9 V
MACHINE OPERATION
1.
Install the portafilter by inserting it into the group head and
rotate the portafilter handle from left to right. The portafilter is
inserted properly once it is firmly inside the group head and the
portafilter handle is sitting at 90 degrees from the face of the
machine (Fig G).
2.
You can now turn the group control paddle to start the water
flowing through the portafilter.
3.
It is important to leave the portafilter installed in the group
head when not in use. The portafilter must remain heated for a
successful brew process. It will also prevent the head seal inside
the group head from drying out prematurely.
4.
Single (with one spout) and double (with two spouts) portafilter
handles come ready assembled with single and double baskets
fitted.
5.
You are now ready to start brewing coffee by removing the
portafilter and placing ground coffee inside the filter basket.
Press down on the coffee with the supplied tamper and install the
To Next Page
Loading...
