10
STEP 5 - Determine whether your TV has a flat, irregular, or obstructed back
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2 Temporarily lay your soundbar mount assembly on the back of your TV.
3 Align the screw holes in the horizontal soundbar bracket with the mounting screw holes on your TV.
4 Identify which type of back your TV have:
• Flat back: The bracket lays flush against the back of your TV and doesn’t block any jacks. You don’t need TV
wall-mount spacers. Go to STEP 6 - Install the soundbar mount on your TV
on page 11.
• Obstructed back: The bracket blocks any of the jacks on the back of your TV. You need TV wall-mount spacers. Go to
STEP 6 - Install the soundbar mount on your TV
on page 11.
• Irregularly-shaped back: There is a gap between the brackets and some part of the back of your TV. You need TV
wall-mount spacers. Go to STEP 6 - Install the soundbar mount on your TV
on page 11.
To Next Page
Loading...
Need help?
General
