16
Specifications
Sender
Receiver
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Audio Input: Stereo, speaker-level • Maximum audio input signal: 10 V RMS into
6.6 Kohms
Audio Output: Wireless • Stereo, 16-bit, 48 KHz uncompressed
• Bit-rate: 1.465 Mbps
• Raw wireless bit-rate: 2 Mbps
Supply voltage •5V
Transition Delay • 15-20 ms
Audio Input: Wireless • Stereo, 16-bit, 48 KHz, uncompressed
• Wireless audio system performance
• Signal-to-Noise Ratio: 87 dB
• Total harmonic distortion: 0.4% (at 1 KHz, Output
2V RMS
Audio Output: High Efficiency Class D,
Speaker-level
• Supports 4 to 16 ohm speakers
• Audio output power: 2 × 25 W (RMS) into 4 ohms
(no more than 10% THD)
High Efficiency Class D Output
Transition Delay • 15-20 ms
Power Supply • AC 120 V ~ 60 Hz
Power Consumption •15 W
To Next Page
