Rockford Fosgate punch 60X2 User Manual

®
®®
2-CHANNEL AMPLIFIERS
OPERATION & INSTALLATION
®
®
®
®

Rockford Fosgate punch 60X2 Specifications

General

Brand	Rockford Fosgate
Model	punch 60X2
Category	Amplifier
Language	English

Summary

Introduction

Punch Amplifier Accessory Pack

Lists items included in the amplifier's accessory pack, such as hardware and documentation.

Technical Design Features

TRANS•ANA Audio Circuit

Explains the low-voltage circuit for clear audio signal at high volumes.

TOPAZ Noise Reduction

Describes the ground loop noise reduction system for improved isolation.

DSM Manufacturing Process

Details the Discrete Surface Mount manufacturing process for improved efficiency and reliability.

XCard Internal Crossover

Explains the internal active crossovers for flexible frequency adjustments.

MOSFET Amplifier Components

Discusses the advantages of MOSFETs in power and output stages for stability and linearity.

NOMAD Protection Technology

Describes the analog computer process for safe output power management.

Amplifier Design and Controls

Physical Design Features

Covers heatsink, end caps, speaker, power, REM terminals, and RCA jacks.

Control and Indicator Functions

Explains input sensitivity, Punch EQ, LED power indicator, and status display.

Installation and Mounting Procedures

Installation Considerations and Safety

Provides a list of tools and essential safety rules for amplifier installation.

Mounting Location Recommendations

Recommends optimal mounting locations (trunk, passenger compartment) for proper cooling.

Battery and Charging System

Advises on checking the vehicle's electrical system capacity for amplifier load.

Wiring the System Safely

Outlines steps for routing RCA and power cables, emphasizing noise prevention.

Configuring the XCard Crossover

Guides on configuring the internal crossover card for different frequency operations.

Resistor Chart for XCard Modification

Provides resistor values for modifying the XCard's crossover frequencies.

Operation Modes and System Diagrams

Amplifier Power Connections

Illustrates the correct power and remote turn-on connections for the amplifier.

Stereo, Mono, and Stereo/Mono Operations

Shows speaker connections and gain settings for various audio output modes.

System Configuration Diagrams

Presents various system configurations (2-way, 3-way, 4-way) with diagrams.

Accessories and Troubleshooting

Rockford Fosgate Optional Accessories

Introduces optional accessories like Punch Status Display and Energy Storage Capacitors.

Troubleshooting Common Amplifier Issues

Offers solutions for common amplifier issues like no power, no sound, or noise.

Performance Measurements and Specifications

Dynamic Power Measurement Explained

Explains the IHF-202 standard and how amplifier power is measured.

Amplifier Performance Specifications

Lists detailed technical data including power ratings, frequency response, and dimensions.

Warranty and International Information

Product Warranty Information

Outlines the terms, conditions, and coverage of the product warranty.

International Sales Information

Provides contact details and considerations for international users.