Rocktron ALL ACCESS - COPY, Page 4 of 4 - Set Copy

50
COPY, Page 4 of 4 - Set Copy
The fourth page of the COPY program, Set Copy, allows for an entire set to
be copied from one set location to another. Set Copy copies all of the songs and
their order of an entire set (50 songs).
To copy a set to another set location:
() With the 2ND L.E.D. still lit, press the "ð" switch to access the next page
of the copy program, Set Copy. (If the All Access is not already in the
COPY editing mode, press "2ND", then "COPY", followed by "ð" three
times.)
() Use the "INC" and "DEC" switches directly below the displayed set to be
copied to select the desired set.
() Use the "INC" and "DEC" switches directly below the displayed set
destination to select the desired set location to copy to.
() Press the "CTR STORE" button to initiate the copy. "COPYING" will be
displayed momentarily before returning to the Set Copy screen.
Tip:
If only a few changes need to
be made to an existing set to
create a new set, copy the
existing set and make the
changes to the new set . This
will be much quicker and easier
than creating an entirely new
set.