Need help?Do you have a question about the Rockville dB15 and is the answer not in the manual?
General| Input Impedance | 10K Ohms |
|---|---|
| Input Sensitivity | 0.2V - 6V |
| RMS Power Output (2 Ohms) | 750 Watts |
| Peak Power Output (2 Ohms) | 1500 Watts |
| RMS Power Output (4 Ohms) | 500 Watts |
| Peak Power Output (4 Ohms) | 1000 Watts |
| Bass EQ | 0dB - +12dB @ 45Hz |
| Cooling | Internal Fan |
| Protection | Thermal, Short Circuit, Overload |
General safety precautions for amplifier installation and operation, including securing the unit, avoiding moisture, and ensuring ventilation.
Advisory regarding potential hearing damage from prolonged high volume usage and recommendation to use ear protection.
Explains the IC-controlled protection features and status LEDs for amplifier monitoring.
Details the amplifier's automatic shutdown at 80°C and restart upon cooling.
Describes protection against speaker shorts and low impedance, indicated by the Protection LED.
Explains the protection circuit that manages input overload conditions.
Protects speakers from DC voltage and the amplifier from malfunctions.
Key steps before installation, including battery disconnection and system wiring planning.
Guidance on securely mounting the amplifier with proper airflow and avoiding drilling hazards.
Describes the remote connection for controlling amplifier power with the system.
Details on wiring harnesses, fuse placement, and secure grounding techniques.
Recommendations for wire gauge and periodic tightening of connections for reliability.
Guide to setting crossovers, bass equalizer, and input sensitivity (LEVEL control).
Critical instruction to connect speaker negatives with a wire strap during bridging to prevent amplifier damage.
To Next Page