Rockwell Automation Allen-Bradley 2711R-T7T

Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021 29
Chapter 2 Configure the Terminal
2. Press Communication.
3. Press Disable DHCP.
The IP Mode now displays the text "Static".
4. Press Set Static IP address screen appears.
5. Press the blue area next to IP address to enter an IP address in the Static
IP address field.
IMPORTANT
The MAC address value display is only available in firmware
revision 3.011 onwards.
Communication
Disable DHCP
Set Static IP Address
VNC Settings
Port Settings
FTP Settings
Back
PV800T7T
0
Protocol: *
Status: Unavailable
Device Name:
Node Address:
IP Mode: DHCP
IP Address: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
MAC Address: XX:XX:XX:XX:XX
Static IP Address
0.0.0.0
0.0.0.0
0.0.0.0
Back
IP Address:
Mask:
Gateway: