POINT I/O Field Potential Distributor Modules 7
Publication 1734-IN059G-EN-P - December 2018
Before You Begin
The purpose of the module is to break the field power distribution.
Use the module to change the field power distribution source for I/O modules to the right
of the module. This facilitates logical or functional partitioning of low-channel count,
high I/O-mix applications using the 1734-adapters, 1734-PDN, and 1734D Series
communication interfaces. This module passes through all POINT I/O™ backplane
signals except the internal field power bus for field devices.
You can use the module with a range of voltage inputs to include the following:
• 5…250V DC applications
• 24…240V AC applications
•I/O modules
POINT I/O Field Potential Distributor Module
Description Description
1 Module label 4 Removable terminal block handle
2 Interlocking side pieces 5 Removable terminal block (RTB)
3 DIN rail locking screw (orange)
To Next Page
Loading...
