Rockwell Automation Allen-Bradley PowerFlex 700 Series Reference Manual

106 Rockwell Automation Publication 750-RM100A-EN-P - August 2019
Chapter 11 Application References
Configure the Modular Control Profiles
1. Power up the drive and establish a connection with Connected
Components Workbench software.
2. Navigate to the Overview page for the drive. Then click Device
Definition.
3. Then click Dynamic Features.
4. Select Induction FV under Primary Motor Control Mode.

Rockwell Automation Allen-Bradley PowerFlex 700 Series Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PowerFlex 700 Series
Category	DC Drives
Language	English