Rockwell Automation DEVICENET 1771-SDN - Verifying the Photoeye Configuration

Publication 1771-6.5.132 - June 2000
4-12 Configuring the DeviceNet Network
You will be prompted to download the changes to the device (i.e.,
the scanner).
9. Click on Yes.
Verifying the Photoeye Configuration
1. Double-click on the 1771-SDN module icon and again select the
Scanlist tab.
2. Double-click on the photoeye in the Scanlist.
IMPORTANT
The PLC-5 processor must be in Program mode to
download the scanlist to the 1771-SDN module.