Publication 1771-6.5.132 - June 2000
6-4 Creating and Running the Example Application Program
4. Enter the following ladder program.
5. Save the program using an appropriate name, e.g., “DNET_PLC”.
Input data file mapped
by RSNetWorx for DeviceNet
Output data file mapped
by RSNetWorx for DeviceNet
RediSTATION Start bit
RediSTATION Stop bit
RediSTATION Indicator Light bit
Photoeye input bit
Length of 62 specifies the first
data block. See the Automapping
Length of 62 specifies the first
data block. See the Automapping
example in chapter 4.
example in chapter 4.
To Next Page
Loading...
