Safety
Regulatory Compliance
MagneMover LITE Service Manual 11
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Equipment Regulatory Guidelines
The following regulatory guidelines are provided to aid in the use and service of the Mag-
neMover LITE components in a transport systems.
• ICT Customer Support issues Technical Advisories to notify the owners of record of
any field retrofits.
• Contact ICT Customer Support for information regarding repair and maintenance ser-
vice policies, both during the production of the MM LITE components and after pro-
duction is discontinued.
• Any user-caused damage during integration of the MagneMover LITE components
into their equipment is the responsibility of the user.
• Responsibility for work that MagneMotion authorized technicians perform or for
equipment that the owner of record transports or resells, is determined on a
case-by-case basis by ICT Customer Support.
• Any parts being returned to MagneMotion must be packaged according to the instruc-
tions provided in the Packing Procedure on page 134.
• MagneMotion provides training for the MagneMover LITE components as integrated
into a transport system. Any personnel that are performing service procedures on the
MM LITE components must be properly qualified and trained. Damage that results
from improperly performing a procedure or not following cautions is not covered
under warranty or service agreements.
To Next Page
Loading...
Need help?
General
