Maintenance
Shipping
134 MagneMotion
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Packing Procedure
When any of the MagneMover LITE components are shipped, either for return to MagneMo-
tion for service or to another location, they must be properly packaged to make sure that they
arrive undamaged. The following procedure provides the correct method of handling and
packaging the MagneMover LITE components for shipment.
NOTE: The original shipping packaging must be used when shipping MagneMover LITE
components. If the original packaging has become lost or damaged, contact Mag-
neMotion for replacements.
CAUTION
Strong Magnets
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts, such as fingers, between a
vehicle (puck) or magnet array and any ferrous material
or another magnet array.
• Vehicles (pucks) or magnet arrays not being used must be
secured individually in isolated packaging.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
CAUTION
Lift Hazard
The MagneMover LITE components can weigh as much as
7.3 kg [16.1 lb].
Use proper techniques for lifting and safety toe shoes when
moving any MagneMover LITE components.
To Next Page
Loading...
Need help?
General
