Rockwell Automation MagneMotion MagneMover LITE Service Manual

Maintenance
Troubleshooting
MagneMover LITE Service Manual 53
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Troubleshooting
This section describes the common difficulties that can be encountered with the MagneMover
LITE transport system components and software.
For assistance, see Contact ICT Customer Support on page 63.
Initial Troubleshooting
This section covers the initial determination of the problem area within the MagneMover
LITE transport system and provides direction to the second step of the troubleshooting pro-
cess. If a specific problem is suspected, see that problem in Table 7. If the problem has not
been identified, review each of the symptoms that are identified in Table 7 to help determine
the problem area.
Table 7: Initial Troubleshooting
Symptom Possible Problem Area
Power lights do not turn on. See Power Related Troubleshooting on page 54
Reset of switch and paths that are associated
with the switch fails.
Motors report power-related faults.
Vehicles do not seem to move as fast as when
the MagneMover LITE transport system was
initially installed.
See Power Related Troubleshooting on page 54
See Motion Control Troubleshooting on page 59
See Precision Rail Option Troubleshooting on
page 61
Node controller logs do not indicate correct
time.
See Node Controller Troubleshooting on page 57
MM LITE transport system does not respond to
the host controller.
See Communication Troubleshooting on page 58
See Motion Control Troubleshooting on page 59
Vehicles producing excessive noise. See Motion Control Troubleshooting on page 59
See Precision Rail Option Troubleshooting on
page 61
The light stack does not function as expected. See Light Stack Troubleshooting on page 62

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English