Rockwell Automation MagneMotion MagneMover LITE Service Manual

Maintenance
Troubleshooting
MagneMover LITE Service Manual 61
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Precision Rail Option Troubleshooting
This section covers the determination of problems specific to the precision rail option for the
MagneMover LITE transport system
Table 12: Precision Rail Option Troubleshooting
Symptom Problem Description Corrective Action
Precision rail vehicles are moving
abnormally slow or jerky.
Vehicle is binding on the rails. Make sure that the rails are prop-
erly lubricated (see Manually
Lubricating the Precision Rails
on page 45 and Refilling the
Lubricating Applicator for Preci-
sion Rail Vehicles on page 46).
Vehicle bearings are not set cor-
rectly (log messages indicate that
the motors are overheating)
Make sure that the bearing adjust-
ment on the vehicles is correct
(see Replace Precision Rail Vehi-
cles on page 104).

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English