Rockwell Automation MagneMotion MagneMover LITE Service Manual

Safety
Recycling and Disposal Information
MagneMover LITE Service Manual 29
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Recycling and Disposal Information
Information regarding disposal and recycling are provided in this section. The modules
of the MagneMover LITE transport system use the following items that require special
handling for disposal or recycling. At the end of its life, this equipment must be col-
lected separately from any unsorted municipal waste and disposed of as described in
this section.
For China RoHS information, see https://literature.rockwellautomation.com/idc/
groups/literature/documents/td/pec-td003_-en-e.pdf and reference Table B.
MagneMover LITE Transport System
No hazardous materials, other than the materials identified in this section, are used in the
MagneMover LITE components. The following items require special handling for disposal or
recycling.
Motors
The motors contain the following materials and must be disposed of by following all facility,
local, and national procedures for the disposal of electronic equipment:
• Aluminum alloy with chromate over cadmium plating.
• Anodized Aluminum.
• Zinc-plated Low Carbon Steel Screws.
• Aluminum.
• Stainless Steel.
• Stainless Steel with Nickel plating.
• Circuit board with connectors and semiconductors, potted with Sylgard
®
164.
• EPDM (synthetic rubber).
• Synthetic rubber.
• Silicone sealant.
•Viton
®
(switch only).
• Igus
®
L280 (switch only).

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English