Rockwell Automation MagneMotion MagneMover LITE Service Manual

Maintenance
Repair
MagneMover LITE Service Manual 111
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
tion. Insert the two M3 x 8 mm screws through the top of the vehicle and into the holes
on the applicator and tighten finger-tight only. Do not overtighten the screws or they
will strip the holes on the applicators.
4. Apply lubricant to the applicator, see Refilling the Lubricating Applicator for Preci-
sion Rail Vehicles on page 46.

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English