Safety
Safety Considerations
14 MagneMotion
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
• Use of the MagneMover LITE components for any purpose other than as a linear
transport system is not recommended and can damage the MM LITE components or
the equipment where they are installed.
• Always operate the MM LITE transport system with appropriate barriers in place to
help prevent contact with moving objects by personnel.
• Do not install or operate the MM LITE transport system if any of the components have
been dropped, damaged, or are malfunctioning.
• Keep cables and connectors away from heated surfaces.
• Do not modify the connectors or ports.
MagneMover LITE Transport System Hazard Locations
Figure 1: Locations of Hazardous Points on the MagneMover LITE Transport System
Switch (typical)
Mechanical Hazard – Pinch Point
Guideway (typical)
Mechanical Hazard – Pinch Point
Vehicle/Puck (typical)
Mechanical Hazard – Pinch Point
Magnetic Field Hazard
To Next Page
Loading...
Need help?
General
