MagneMover LITE User Manual Addendum,
Wide Vehicles
MMI-UM034B-EN-P Page 21 of 31
Diverge Node
The additional properties for the Diverge Node are described after Figure 22. See the Nodes
section of the UI Reference in the MagneMover LITE Configurator User Manual for detailed
descriptions of all other items on the Diverge Node page.
Figure 22: Diverge Node Page
• Entries and Exits – Lists the entry and exit paths for the node.
• Path – Provides menus that list all paths in the transport system for selection of the entry
path and the two exit paths where the node is located. The default is None.
NOTE: If the configured vehicle length is longer than the selected exit path, a warning
similar to the one that is shown in Figure 23 is displayed.
Figure 23: Exit Path Length Warning
To Next Page
Loading...
Need help?
General
