VIEWING THE TUTTI SETTING:
1. Press and hold the TUTTI piston or toe piston.
2. While holding the TUTTI piston, press the SET piston. The stops of the Tutti
setting light.
Note: Tutti cannot be set unless it is unlocked.
UNLOCKING THE TUTTI:
1. Press and hold the TUTTI piston for approximately five seconds until “TUTTI
LOCKED” appears in the Console Display.
2. While continuing to hold TUTTI, rotate the Alpha Dial either direction until the
Console Display reads “TUTTI UNLOCKED.”
3. Release the TUTTI piston. The Tutti is unlocked.
SETTING THE TUTTI:
1. Select the desired stops.
2. Press and hold the SET piston, and press the TUTTI piston. The Tutti is set.
LOCKING THE TUTTI:
1. Press and hold the TUTTI piston for approximately five seconds until “TUTTI
UNLOCKED” appears in the Console Display.
2. While continuing to hold TUTTI, rotate the Alpha Dial either direction until the
Console Display reads “TUTTI LOCKED.”
3. Release TUTTI. The Tutti is locked.
RESTORING THE FACTORY TUTTI SETTING:
1. Press and hold the TUTTI piston for approximately five seconds.. The Console
Display reads “TUTTI LOCKED” or “TUTTI UNLOCKED”.
2. While holding TUTTI, press and hold SET for an additional five seconds. The
Console Display reads “TUTTI FACTORY DEFAULT”.
3. Release both pistons
To Next Page
Loading...
