The Floppy Disk Drive
83
• When you execute the 'Write Globals' function ([PRESETS] menu), the global settings are written to the
global file in the internal, non-volatile memory. They will therefore be activated next time the instrument is
turned on.
• When you execute the 'Save Globals' function ([PRESETS] menu), the global settings are written to the
global file on disk. This saves the current settings, not a copy of the internal global file.
• When you execute the 'Read Globals' function ([PRESETS] menu), the global settings are read from the
global file in the internal, non-volatile memory, just as though the instrument had just been turned on.
• When you execute the 'Load Globals' function ([PRESETS] menu), the global settings are read from the
global file on disk. This only affects the current settings and not the global file in the internal memory.
To Next Page
Loading...
