Roger Technology BG30/1004/HS User Manual

IS142 Rev.05 18/06/2018
B70/1DCHP
centrale di comando per cancelli scorrevoli
Istruzioni originali
IT - Istruzioni ed avvertenze per l’installatore - pag. 19
EN -
/ŶƐƚƌƵĐƟŽŶƐĂŶĚǁĂƌŶŝŶŐƐĨŽƌƚŚĞŝŶƐƚĂůůĞƌ- pag. 46
DE -
ŶǁĞŝƐƵŶŐĞŶƵŶĚ,ŝŶǁĞŝƐĞĨƺƌĚĞŶ/ŶƐƚĂůůĂƚĞƵƌ - S. 73
FR -
/ŶƐƚƌƵĐƟŽŶƐĞƚĐŽŶƐŝŐŶĞƐƉŽƵƌůŝŶƐƚĂůůĂƚĞƵƌ- p. 100
ES -
Instrucciones y advertencias para el instalador - pág. 127
PT -
Instruções e advertências para o instalador - pág. 154
NLD -
ĂŶǁŝũnjŝŶŐĞŶĞŶǁĂĂƌƐĐŚƵǁŝŶŐĞŶǀŽŽƌĚĞŝŶƐƚĂůůĂƚĞƵƌ - pag. 181
PL -
/ŶƐƚƌƵŬĐũĂŝŽƐƚƌnjĞǏĞŶŝĂĚůĂŝŶƐƚĂůĂƚŽƌĂ - pag. 209

Roger Technology BG30/1004/HS Specifications

General

Brand	Roger Technology
Model	BG30/1004/HS
Category	Control Unit
Language	English

Summary

General Safety Precautions

Product Description

Technical Specifications

Description of Connections

Detailed guide to electrical connections for the control unit and accessories.

Travel Acquisition

Acquisition Procedure

Step-by-step guide for gate travel path and limit switch configuration.

Parameter Menu

Setting Reverse Time After Safety Edge or Obstacle Detection

Adjust reverse time for safety edges or obstacle detection.

Special Parameters for BG30/1400/R Series

Selection Automation System Model

Select automation model for REVERSIBLE motors based on weight.

Commands and Accessories

Test Photocell Connection and Battery Saving

Connect photocells for testing and battery saving features.

Photocell FT2 Not Connected or Incorrect Connection

Photocell FT1 Not Connected or Incorrect Connection

Safety Input and Command Status (TEST Mode)

Safety Input and Command Status Indicators

Interpreting display codes for commands and safety devices in TEST mode.

Alarm and Anomaly Signaling

Problem: Gate Does Not Open or Close

Troubleshooting steps for gate opening or closing failures.

Learning Procedure Does Not Conclude

Troubleshooting steps when the travel acquisition procedure fails.