Roger Technology AG/CTRL User Manual

|
ROGER BRUSHLESS
centrale di comando AG/CTRL per 1 motore

IS88 Rev.01
30/10/2014






automazioni evolute

Roger Technology AG/CTRL Specifications

General

Manufacturer	Roger Technology
Model	AG/CTRL
Category	Control Unit
Power supply	230V AC
Maximum motor power	500W
Operating temperature	-20°C to +55°C

Summary

Introduction to instructions and warnings

Product description

Details the AG/CTRL control unit, its encoders, and signal generation for automation.

Technical features

Connections and fuses description

Explains the board layout, power supply, and fuse types (F1, F2, F3, F4), and standard configurations for photocells, safety edges, motor connections, and radio receivers.

Display functioning mode

Explains the different modes displayed on the control unit: status, parameters, standby, and test modes, including controls and safety device status.

Installation

Stroke programming sequence

Guides users through the process of programming the barrier's stroke length and motor tuning.

Adjustments

Explains how to adjust parameters related to acceleration, speed, and deceleration for barrier movement.

PHOTOCELLS TEST mode

Error signals

Lists and explains common error codes displayed on the unit and their solutions.

Mechanical release enabling

Describes the procedure for manually releasing and moving the barrier.

Extended operating mode

Testing

Maintenance

Disposal