a. Attach Saddle (103) onto the Saddle Adjustable frontward or backward to get desired position
Bracket (104) using 3 x Aircraft Nuts (27) and tighten using 1 x Knob (109).
and 3 x Washers (102).
c. Inset the Saddle Post Assembly (101) into
Note: Hardware (27) and (102) were pre-assembled the upper opening of the Main Frame, get your
to the bottom of the saddle (103) in the factory. desired height then tighten using 1 x Lock
Knob (99).
b. Attach Saddle Adjustable Bracket (104) onto the
top of the Saddle Post (101), move the Bracket
To Next Page
Loading...
