Rohde & Schwarz FSH-Z2 - Overview of the Spare Parts; Opening the Instrument; Closing the Instrument

Spare Part Replacement R&S FSH-Z2
1145.5767.02 3.4 E-1
Overview of the spare parts
Table 3-1 List of spare parts and order numbers
Reference Part R&S Order Number
01/02/S1
Plastic Top/Bottom Cover
1157.3506.00
06 Power Cable Assembly (Binder connector) 1157.3512.00
07/10 Coax Cable Assembly 1157.3529.00
09/S2 N-connector for TEST Port 1157.3535.00
07/S2 N-connector for GEN OUTPUT Port 1157.3541.00
03/04/07/09/
S2/S3/S4
SWR-DTF Unit 1157.3558.00
Note: The references can be found in the exploded drawing on the previous page.
Opening the instrument
(See exploded drawing for related numbers.)
½ Loosen the four screws (S1).
½ Turn the instrument so that the bottom with type plate touches the table.
½ Remove the top cover (item 01).
Closing the instrument
½ Place the top cover (item 01).
½ Turn the instrument so that the top cover touches the table.
½ Fasten the four screws (S1).