R&S FSH Putting into Operation
Configuring the R&S FSH
Quick Start Guide 1309.6269.12 - 09 35
Showing compass information
► In the "Instrument Setup" dialog box, select the "Show Compass Information" item.
► Press the ENTER key.
The R&S FSH opens a dropdown menu to turn the display of directions on and off.
► Turn compass information on or off as required.
► Confirm the selection with the ENTER key.
When this feature is on, the R&S FSH displays the compass information at the top of
the display
Assigning functions to the toggle switch
The R&S HL300 has a toggle switch on its handle that you can assign one of several
functions to.
► In the "Instrument Setup" dialog box, select the "Assign Antenna Switch" item.
► Press the ENTER key.
The R&S FSH opens a dropdown menu to select the function of the toggle switch.
- Preamplifier
Using the toggle switch turns the preamplifier on and off.
- Save current GPS position
Using the toggle switch tags your current position in the map material.
► Select the menu item as required.
► Confirm the selection with the ENTER key.
The R&S HE300 also has a toggle switch, but it always turns the internal preamplifier
of the antenna on and off. When this preamplifier is on, the R&S FSH displays an
antenna icon in the hardware settings.
To Next Page
Loading...
