R&S FSH Putting into Operation
Configuring the R&S FSH
Quick Start Guide 1309.6269.12 - 09 36
Calibrating the antenna
If you need to know specifics about the antenna, for example for service or support,
you can get the necessary information in the "Antenna Service Menu" provided on the
R&S FSH.
The "Antenna Service Menu" also contains functionality to calibrate the antenna.
► In the "Instrument Setup" dialog box, select the "Antenna Service Menu" item.
The R&S FSH informs you that it will turn off the antenna to determine the antenna
information.
► Press the "Yes" softkey.
The R&S FSH tries to determine the antenna characteristics. It shows the results in
a dialog box.
► Press the "Calibrate" softkey.
The R&S FSH starts the calibration.
For antenna calibration, it is necessary to point the antenna in different directions.
Follow the instructions on the screen to successfully calibrate the antenna.
To Next Page
Loading...
