R&S NRP-Z5x Supplement
1138.0470.32-01- Supplement 1 E-1
Operation of Power Sensor R&S NRP-Z5x
from R&S NRP base unit
The power sensor shipped with this manual has firmware revision 01.00 or higher. For operation from
an R&S NRP base unit, all software components within the base unit must also be of revision 02.00 or
higher.
Revision numbers for the software components installed in the base unit can be displayed under menu
item ’System Info’, lines ’Main Program’, ’Bootloader’ and ’Keybd. Ctrl.’. The ’System Info’ can be found
in the ’File’ menu for revision numbers lower than 02.00 and in the ’System’ menu otherwise.
To Next Page
Loading...
