Remote Control - Commands R&S NRP-Z5x
1137.0463.12 6.24 E-7
Command Parameter Unit Default setting Page
SENSe:CORRection:DCYCle:STATe[?] OFF | ON OFF 6.9
SENSe:CORRection:OFFSet[?] –200.0 to 200.0 dB 0.0 6.10
SENSe:CORRection:OFFSet:STATe[?] OFF | ON OFF 6.10
SENSe:CORRection:SPDevice:STATe[?] OFF | ON OFF (can be
modified by the user)
6.10
SENSe:FREQuency[?] 0.0 to 18.0e9 (NRP-Z51)/
33.0e9 (NRP-Z52)/
40.0e9 (NRP-Z55 Mod. 03)/
44.0e9 (NRP-Z55 Mod. 04)/
50.0e9 (NRP-Z56)/
67.0e9 (NRP-Z57)/
110.0e9 (NRP-Z58)
Hz 50.0e6 6.10
SENSe:FUNCtion[?] "POWer:AVG" "POWer:AVG" 6.11
SENSe:POWer:AVG:APERture[?] 0.001 to 0.3 s 0.005 6.11
SENSe:POWer:AVG:BUFFer:SIZE[?] 1 to 1024 1 6.11
SENSe:POWer:AVG:BUFFer:STATe[?] OFF | ON OFF 6.12
SENSe:POWer:AVG:SMOothing:STATe[?] OFF | ON OFF 6.12
SENSe:SGAMma:CORRection:STATe[?] OFF | ON OFF 6.12
SENSe:SGAMma:MAGNitude[?] 0.0 to 1.0 0.0 6.13
SENSe:SGAMma:PHASe[?] –360.0 to 360.0 degree 0.0 6.13
SYSTem Commands
SYSTem:FEATures? 6.14
SYSTem:INFO? [Item] 6.14
SYSTem:INITialize 6.16
SYSTem:LIMits? 6.16
SYSTem:MINPower? W 6.16
SYSTem:RUTime 0.0 to 10.0 s 0.1 6.17
SYSTem:SUTime 0.0 to 10.0 s 0.0001 6.17
SYSTem:TRANsaction:BEGin 6.17
SYSTem:TRANsaction:END 6.17
Test Commands
TEST:SENSor? 6.18
To Next Page
Loading...
