Rohde & Schwarz R&S SMA100B - Kboard Subsystem

Remote Control Commands
R&S
®
SMA100B
443User Manual 1178.3834.02 ─ 05
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number that is used as part of the file name for the next hard copy in auto-
matic mode.
At the beginning, the count starts at 0. The R&S SMA100B searches the specified out-
put directory for the highest number in the stored files. It increases this number by one
to achieve a unique name for the new file.
The resulting auto number is appended to the resulting file name with at least three
digits.
Return values:
<Number> integer
Range: 0 to 999999
*RST: 0
Example: See Example "Store a hard copy of the display" on page 438
Usage: Query only
Manual operation: See "Current Auto Number" on page 314
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix <Prefix>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe <State>
Uses the prefix for the automatic generation of the file name, provided PREF:STAT is
activated.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 438
Manual operation: See "Prefix, Year, Month, Day" on page 314
13.12 KBOard Subsystem
The KBOard subsystem contains the commands to set a connected keyboard.
:KBOard:LAYout.............................................................................................................443
:KBOard:LAYout <Layout>
Selects the language for an external keyboard and assigns the keys acccordingly.
KBOard Subsystem