Rohde & Schwarz RTA4004 - Page 523

Remote control commands
R&S
®
RTA4000
523User Manual 1335.7898.02 ─ 08
Usage: Query only
MEASurement<m>:RESult:NPEak? <NegativePeak>
Returns the minimum measurement result of the current measurement series.
Suffix:
<m>
.
1..8
Selects the measurement place.
Query parameters:
<NegativePeak> Minimum measurement result
Usage: Query only
MEASurement<m>:RESult:PPEak? <PositivePeak>
Returns the maximum measurement result of the current measurement series.
Suffix:
<m>
.
1..8
Selects the measurement place.
Query parameters:
<PositivePeak> Maximum measurement result
Usage: Query only
MEASurement<m>:RESult:WFMCount? <WaveformCount>
Returns the current number of measured waveforms.
The query for MIN and MAX values is not possible.
Suffix:
<m>
.
1..8
Selects the measurement place.
Query parameters:
<WaveformCount> Number of measured waveforms
Usage: Query only
MEASurement<m>:STATistics:WEIGht? <BufferSize>
Returns the size of the statistics buffer.
Suffix:
<m>
.
1..8
Selects the measurement place.
Return values:
<BufferSize> The buffer size is always 1000 result values.
Measurements