Rohde & Schwarz RTA4004 - Turn On;Off

Remote control commands
R&S
®
RTA4000
734User Manual 1335.7898.02 ─ 08
●
NPEak: negative peak value of the long-term measurement results
●
PPEak: positive peak value of the long-term measurement results
●
STDDev: standard deviation of the long-term measurement results
●
WFMCount: the number of waveforms used for the displayed results
Return values:
<WaveformCount>
Usage: Query only
POWer:MODulation:RESult:UPEak:AVG?
POWer:MODulation:RESult:UPEak:NPEak?
POWer:MODulation:RESult:UPEak:PPEak?
POWer:MODulation:RESult:UPEak:STDDev?
POWer:MODulation:RESult:UPEak[:ACTual]?
POWer:MODulation:RESult:UPEakWFMCount?
Returns the corresponding statistic result for "Vp+".
●
[:ACTual]: current measurement result
●
AVG: average of the long-term measurement results
●
NPEak: negative peak value of the long-term measurement results
●
PPEak: positive peak value of the long-term measurement results
●
STDDev: standard deviation of the long-term measurement results
●
WFMCount: the number of waveforms used for the displayed results
Return values:
<WaveformCount>
Usage: Query only
17.12.10 Turn on/off
POWer:ONOFf:EXECute................................................................................................ 734
POWer:ONOFf:MEASurement.........................................................................................734
POWer:ONOFf:REPort:ADD........................................................................................... 735
POWer:ONOFf:RESult<n>:TIME?....................................................................................735
POWer:ONOFf:EXECute
Starts the turn on/off measurement.
Usage:
Event
POWer:ONOFf:MEASurement <MeasureType>
Selects the turn on or the turn off measurement.
Power analysis (option R&S
RTA-K31)