Rohde & Schwarz RTA4004 - Modulation Analysis

Remote control commands
R&S
®
RTA4000
730User Manual 1335.7898.02 ─ 08
Suffix:
<n>
.
1..3
Parameters:
<StopTime>
POWer:INRushcurrent:GCOunt <GateCount>
Sets the number of inrush current gates.
Parameters:
<GateCount> *RST: 1
POWer:INRushcurrent:REPort:ADD
Adds the result to the report list.
Usage:
Event
POWer:INRushcurrent:RESult<n>:AREA?
Queries the area of the corresponding gate.
Suffix:
<n>
.
1..3
Return values:
<AreaValue>
Usage: Query only
POWer:INRushcurrent:RESult<n>:MAXCurrent?
Queires the maximum current for the corresponding gate.
Suffix:
<n>
.
1..3
Return values:
<MaxCurrentValue>
Usage: Query only
17.12.9 Modulation analysis
POWer:MODulation:TYPE.............................................................................................. 731
POWer:MODulation:THReshold[:UPPer].......................................................................... 732
POWer:MODulation:THReshold:LOWer........................................................................... 732
POWer:MODulation:THReshold:HYSTeresis.....................................................................732
POWer:MODulation:EXECute......................................................................................... 732
POWer:MODulation:REPort:ADD.....................................................................................732
POWer:MODulation:RESult:LPEak:AVG?.........................................................................732
Power analysis (option R&S
RTA-K31)