Rohde & Schwarz Scope Rider RTH - Page 130

Spectrum Analysis
R&S
®
Scope Rider RTH
130User Manual 1326.1578.02 ─ 12
"Save As"
Opens a file explorer where you can select the directory and enter the
filename.
Remote command:
SPECtrum:EXPort:SAVE on page 366
Directory
Defines the directory where the spectrum files are stored. If a USB flash drive is con-
nected, the instrument stores the data to this external device by default.
Remote command:
SPECtrum:EXPort:NAME on page 366
Filename Base
Defines the first part of the filename. The complete filename pattern is:
<filename base>_<date>_<timestamp>.csv.
Remote command:
SPECtrum:EXPort:NAME on page 366
Store with Freq.
Includes the frequency values in the stored results.
Remote command:
SPECtrum:EXPort:INCXvalues on page 366
CSV Column Delimiter
Selects the column delimiter for CSV files. You need to know the delimiter when you
convert the CSV text to columns in a spreadsheet.
6.2.9 Export File Format for Spectrum Results
The spectrum results export file format is similar to a waveform export file; it is also
stored in CSV format. You can convert the comma-separated text to columns (see
Chapter 12.4.3.3, "Converting CSV to Excel Files", on page 276).
Table 6-5: Header data (converted to table)
Spectrum Results [Example data]
Model RTH1004
SerialNumber xxxxx
Firmware Version '1.60'
Acquisition Time Stamp 2017-07-31
14:27:35.96278902
Center Frequency [Hz] 2.5e+008
Span [Hz] 5e+008
RBW [Hz] 2.5e+006
Window Hann
Spectrum Mode (Option R&S RTH-K18)