Instrument tour
R&S
®
SMA100B
39Getting Started 1419.8620.02 ─ 10
1
2
1 2 3 4 5 7 8 9 10 131211
141516171819
6
Figure 5-5: Rear panel view of the R&S
SMA100B RF Signal Generator with height unit
3HU (option R&S
SMAB-B93)
1 = Serial number (six digits in the string 1419.8888.02-<serial number>-<checksum>)
2 = IEC 625/IEEE 488
3, 5 = USB/USB In
4 = LAN
6, 7 = Ref In/Ref Out
8 = V/GHz X-Axis and Z-Axis
9 = Stop
10 = EFC
11 = Marker User1
12 = Inst Trig
13 = Signal Valid
14 = Clk Syn/Clk Syn N
15 = Pulse Sync, Pulse Video and Pulse Ext
16 = LF
17 = Ext 1/2
18 = AC power supply connector and switch
19 = RF 50 Ω
5.2.1 Connectors
IEC 625/IEEE 488
Option: R&S SMAB-B86
General purpose interface bus (GPIB) interface for remote control of the instru-
ment. The interface is in compliance with the standards IEC 625, IEEE 488 and
SCPI.
Rear panel tour
To Next Page
Loading...
