R&S SMR Front Panel
1134.9108.12 E-1 1.5
4 DATA INPUT
Numeric input field
Numeric values, decimal point and minus sign can be
entered by means of the digital keys.
0...9 Enters the digit.
Enters the decimal point
-/ Enters the minus sign.
Deletes the last input (digit, sign or decimal point)
- key [BACKSPACE]
Unit keys with enter function
The unit keys terminate the input of values and specify the
multiplication factor for the respective basic unit.
The basic units are displayed next to the input field while
numbers are entered. In the case of level settings, the unit
keys specify the unit.
G/n dBµV Selects giga/nano, with RF level dBµV.
M/µ µV Selects mega/micro, with level µV.
k/m MV Selects kilo/milli, with level mV.
1x
Enter dB(m) Terminates entries in the basic unit
and value inputs without unit.
Selects with level dBm.
Selects with level offset and level step
width dB.
In order to change to another level unit, simply press the
unit key desired. Parameter LEVEL must be activated, e.g.
by pressing the [LEVEL] key.
Cf. Chapter 3, Section "Change Unit of Level".
Fig. 1-1 Front panel view
To Next Page
Loading...
