Rohde & Schwarz SMR20 - Elements of the Rear Panel

R&S SMR Rear Panel
1134.9108.12 E-1 1.9
Elements of the Rear Panel
6
1
5
4
3
LR 114 196
C
®
US
OPTION INCL.
625
SCPI
230 Vac
2
7
1
REF
REF
REF Output of the internal 10-MHz-reference signal
with reference internal.
Input for external reference frequency 10 MHz with
reference external. LF Output LF signal of the
internal LF-generator.LF Output LF signal
of the internal LF-generator.
 Cf. Chapter 4, Sections "LF Output" and
"Internal/External Reference Frequency (REF OSC)".
2
Power supply connector and
fuse holder
 Cf. Chapter 1, Section “Power Fuses”.
3 AUX
Interface for direct control of additional, external devices.
Pin Designation Assignment
1 MARKER Marker signal output for sweep mode.
2 BLANK Blanking signal input for sweep mode.
3 TRIGGER Trigger input for sweep, memory
sequence and list modes.
4 STOP Input for stopping the sweep.
5 Z-AXIS combined MARKER/BLANK signal.
6 - 9 GROUND
Fig. 1-2 Rear panel view