R&S SMR List Editor
1134.9108.62 E-1 3.13
Edit/View editing function (see Fig. 3-8)
The Edit/View function allows viewing of a complete list or editing individual values of a list.
I
f the cursor is on a value in the left column of the list, the Edit/View mode can be exited by pressing the
[BACK] key. The menu cursor goes back to Edit List.
There is no storage function for the list. This means that any modification of the list will be transferred to
the internal data set and will be effective on exiting the Edit/View function.
Selection: Edit
Fig. 3-8 Edit editing function
List
Indication of list number
Free
Available space. Free 1900, for example, means that there is free space for a
total of 1900 pairs of values (elements) in the list memory.
Len
Occupied space. Len 0100, for example, means that the current list occupies
100 elements in the list memory.
Selection of index
Select an index by means of the rotary knob or enter an index value by
means of the numerical keys.
Editing of parameters
Select the parameter (frequency, power) to be edited by means of the
[SELECT] key or the rotary knob.
Vary the numerical value by means of the rotary knob or enter a numerical
value using the numerical keys and the [ENTER] key.
Upon pressing the [BACK] key, the menu cursor goes back to the column
left of the current column or to the Edit List menu.
To Next Page
Loading...
