SUPER ELF S3 – Dornier
Features and Characteristics
o The Weft Feeder can be set for rotation S or Z depending on the yarn twist.
o Yarn separation is adjustable from 0.7 mm to 2.2 mm.
o Coils detection by means of photocells (Reflective system).
o Storage detection with an integrated photocell (Reflective system).
o Robust and reliable new Reflective sensors system.
o Input Weft breakage control through a photocell integrated in the Super Elf S3, or through
external TFE8 weft Stop Motion device.
o Weft length adjustment, by setting the spool body diameter and the number of coils to be
released at each insertion.
o Range of weft lengths: from 64 to 672 cm.
Note: Weft lengths ranging from 87 to 96 cm CANNOT BE MEASURED.
o CAN BUS communication protocol with the loom Control.
o Pulsar HP brake control.
o Full and half weft threading by means of a pneumatic system.
o New Electromagnet design.
o Reserve Storage position Photocell reliable also in dust environments.
o Permanent Magnet motor for more accurate speed control, faster acceleration, full torque at
all speeds and lower energy consumption.
o Sealed motor, photocells housing and cable connections are IP63 Water Proof standard
o New anti-balloon design with reclining Funnel simplifies maintenance and
optimizes space requirements for multi-color applications.
To Next Page
Loading...