K
kristie87Aug 9, 2025
How to fix a Roksan Audio Amplifier with no power?
- JJohn ParkerAug 9, 2025
If your Roksan Audio Amplifier has no power, make sure that the AC Mains lead is fully inserted and that the unit is switched on at the rear panel.
To Next PageTo Next PageHow to fix a Roksan Audio Amplifier with no power?
If your Roksan Audio Amplifier has no power, make sure that the AC Mains lead is fully inserted and that the unit is switched on at the rear panel.
Why is my Roksan Audio Amplifier causing hum from speakers?
If you're experiencing hum from the speakers connected to your Roksan Audio Amplifier, the most likely cause is incorrect grounding. Check the Mains polarity and grounding on all connected equipment.
What to do if my Roksan Audio Amplifier has no output on one or both channels?
If your Roksan Audio Amplifier has no output on one or both channels, here's what you should check: * Ensure the amplifier is not in stand-by mode (MODE light should be RED, not GREEN). Press the MODE button to switch to operational mode. * Verify all input connections are correctly connected. * Inspect speaker output connections on the rear panel. * Confirm the correct input source is selected and working. * Deselect Tape Monitor if it's active. * Deselect Full Mute if it's selected (MODE light should be RED, not flashing RED). * If the amplifier is in 20dB MUTE, (MODE light AMBER) press MODE button to set amplifier in operational mode (MODE light RED) (check volume setting first). * Check the polarity of speaker connections, especially if you're using Multi-wiring or Mul...
Details items included in the packaging and the importance of retaining packing materials.
Instructions for cleaning the amplifier cabinet and front panel, advising against abrasives.
States compliance with EU directives and mentions the CE mark.
Provides guidance on mains voltage, plug types, fuse replacement, and earthing requirements.
Covers FCC warning, interference issues, and location advice for the amplifier.
Instructions for connecting the mains power lead to the unit and the power supply.
Explains how to connect various audio sources to the amplifier's input sockets.
Details connecting a Moving Coil cartridge or dedicated Phono Stage.
Describes connecting left and right loudspeakers to the amplifier binding posts.
Explains the benefits of Bi-Amping for multi-drive unit loudspeakers.
Illustrates connection methods for tri-wired and bi-wired speakers.
Guides on powering the amplifier on from the rear panel and activating it from standby.
Describes the functions of front panel controls like Mode, Input, and Volume.
Explains how to use the Tape Monitor function for recording and playback.
Details the operation and controls of the included remote handset.
General| Brand | Roksan Audio |
|---|---|
| Model | LIII |
| Category | Amplifier |
| Language | English |
