Do you have a question about the Roksan Audio OXYGENE and is the answer not in the manual?
Carefully lift the amplifier from its box and save packaging for future use.
Keep safety and operating instructions for future reference.
Adhere to all warnings on equipment and in operating instructions.
Avoid using the unit near water to prevent damage.
Site the unit away from heat sources like radiators and sunlight.
Place the unit in a well-ventilated area, avoiding blocked vents.
Unplug the unit from the mains when left unused for extended periods.
Keep power off when connecting/disconnecting to prevent noise and damage.
Connects the separate power cord to the rear AC power socket.
Press the ON/OFF button to power up; reduce volume before switching off.
The unit lacks a standby function for environmental friendliness.
Connect loudspeakers using safety banana output sockets, avoid shorting wires.
Connect active subwoofers using RCA output connectors (pre-out signal).
Location of the remote receiver behind front panel holes.
Adjust display brightness modes (Bright, Dim, Off) and function selection.
Instructions for replacing the two CR 2430 button type batteries in the remote.
Using hidden switches on the cabinet to control amplifier functions.
Select inputs by touching "IS", then "LESS" or "MORE".
Increase volume by touching the "MORE" control.
Decrease volume by touching the "LESS" control.
Details of each button's function on the remote control.
Steps to pair Bluetooth devices to the amplifier using aptX technology.
Connect and stream audio wirelessly from mobile phones via Bluetooth.
Conditions for warranty repairs, including carriage costs and authorized service.
Warranty is void if product is misused, tampered with, or not packed correctly.
Implied warranties limited to duration; consumer rights unaffected.
ROKSAN reserves the right to modify product design and specifications without notice.
| Brand | Roksan Audio |
|---|---|
| Model | OXYGENE |
| Category | Amplifier |
| Language | English |